Canopy database › JYRO

JYRO Crossfire 3

9 cellsellipticalnot cross-bracedcurrent
Manufacturer information and SkyLara's calculation only — not advice, not an approval to fly any size or wing loading. Always read the manufacturer's current documents and talk to your canopy coach.

Sizes

86–159 sq ft (8.0–14.8 m²; custom sizes available)

Source: JYRO — Crossfire 3 product page (page modified 2026-09-02) ↗

Designed for (manufacturer wording)

  • Confident intermediate jumpers stepping up from a Safire (at WL 1.0–1.4, first or second fully elliptical 9-cell)
  • Advanced pilots accustomed to smaller / higher-loaded ellipticals (at WL 1.5+) who want performance without going crossbraced
  • Team flyers and camera flyers

Keywords: Soft, consistent openings (Crossfire 2 lineage) · More aggressive dive than Crossfire 2 · Considerably longer recovery arc than Crossfire 2 · Light but not vague front risers · Predictable stall on toggles and rears · Powerful predictable flare

Your wing loading on each size

SizeWing loading
86 ft²—
96 ft²—
106 ft²—
116 ft²—
126 ft²—
136 ft²—
146 ft²—
156 ft²—

JYRO recommended wing-loading range for the Crossfire 3: 1.3–2 lb/ft². Source: JYRO — Crossfire 3 product page (page modified 2026-09-02) ↗

Wing loading = exit weight (lb) ÷ size (ft²). PD's chart lists the MAXIMUM exit weight per skill category — the category shown is the lowest one whose maximum covers your weight, by PD's own rule.

Flight characteristics — in JYRO's words

OpeningSame smooth, soft openings as the Crossfire 2; fully formed nose, no fear of spinning up (JYRO).
Recovery arcConsiderably longer than the Crossfire 2 — turning at the height you are used to means coming out low (JYRO).
GlideExtra glide from a constant cell aspect ratio; long ride back on rears (JYRO).
Speed / diveDives more than the Crossfire 2; snappy turns (qualitative — no airspeed figures published).
FlarePowerful, predictable flare; nose reinforcement reduces distortion (JYRO).
Front risersLighter but not vague (JYRO).
Rear risersPredictable, plenty of warning before stall (JYRO).
Harness responsenot published
Toggle responseAggressive inputs cause drastic altitude loss; predictable stall point (JYRO).
Source: JYRO — Crossfire 3 product page (page modified 2026-09-02) ↗

Frequently asked

What sizes does the Crossfire 3 come in?

JYRO lists the Crossfire 3 in 86–159 square feet.

What is the Crossfire 3 designed for?

In JYRO's words: Confident intermediate jumpers stepping up from a Safire (at WL 1.0–1.4, first or second fully elliptical 9-cell); Advanced pilots accustomed to smaller / higher-loaded ellipticals (at WL 1.5+) who want performance without going crossbraced; Team flyers and camera flyers.

How do I work out my wing loading on a Crossfire 3?

Wing loading = exit weight in pounds (you plus all your gear) divided by the canopy size in square feet. The manufacturer's chart then shows which category that loading falls in. It is information, not approval to fly a size — decide with your canopy coach.

See it in your own data

Fly the Crossfire 3 with a FlySight? Upload your jumps to see your landing pattern, turn height per 90°, consistency and how you fly this canopy compared with others you own.

Analyse my FlySight jumps — free Compare with another canopy

More from JYRO: Safire 4 · JFX 2 · Leia · Petra · Helium · Crossfire 2 · Safire 3

Safety notice: This tool is for data review only. It does not replace canopy coaching, DZ rules, traffic awareness, S&TA guidance, or manufacturer guidance. Everything here is information for learning — not advice or a recommendation about any canopy, wing loading, turn or decision. Your decisions are your own. See the Terms of Service.